DEV Community

Asher Hu profile picture

Asher Hu

404 bio not found

Joined Joined on 
Sandblasting grit: why 320 shows die-cast porosity

Sandblasting grit: why 320 shows die-cast porosity

Comments
2 min read
Draft 1 on a 20-25µm texture: 0.7mm less travel, double ejection force

Draft 1 on a 20-25µm texture: 0.7mm less travel, double ejection force

Comments
3 min read
Same texture grade, 12 vs 22 µm etch: 8 GU vs 3 GU gloss

Same texture grade, 12 vs 22 µm etch: 8 GU vs 3 GU gloss

Comments
3 min read
Boss cracks at the root: wall ratio 0.5–0.6, fillet R0.25, draft 0.5–1

Boss cracks at the root: wall ratio 0.5–0.6, fillet R0.25, draft 0.5–1

Comments
3 min read
Screen print show-through at 0.2mm: fix the datum before the mesh

Screen print show-through at 0.2mm: fix the datum before the mesh

Comments
3 min read
9 ID deliverables, 3 missing: 11 of 16 projects failed at tooling

9 ID deliverables, 3 missing: 11 of 16 projects failed at tooling

1
Comments
2 min read
Weld lines sit where the gate puts them: fix location before process

Weld lines sit where the gate puts them: fix location before process

Comments
2 min read
Acrylic cracks at 1.5 kJ/m : fix wall thickness and corner radius

Acrylic cracks at 1.5 kJ/m : fix wall thickness and corner radius

Comments
2 min read
10x quote gap: Class-A surfaces and T1 mold support vs render-only

10x quote gap: Class-A surfaces and T1 mold support vs render-only

Comments
2 min read
5% more thinner dropped film from 38 to 26μm — and killed the soft-touch feel

5% more thinner dropped film from 38 to 26μm — and killed the soft-touch feel

Comments
4 min read
Mold cost tiers: multi-cavity steel loses 3-8 RMB/part under 50k units

Mold cost tiers: multi-cavity steel loses 3-8 RMB/part under 50k units

Comments
2 min read
3 cost blocks in a design quote: 50-60% design, $210-1,120 mockups

3 cost blocks in a design quote: 50-60% design, $210-1,120 mockups

Comments
2 min read
Paint-free molding versus painting: what you save and what bites back

Paint-free molding versus painting: what you save and what bites back

Comments
2 min read
A snap-fit lives or dies on half a millimeter

A snap-fit lives or dies on half a millimeter

Comments
2 min read
Same leather, a crooked stitch line ruins the whole interior

Same leather, a crooked stitch line ruins the whole interior

Comments
6 min read
Industrial Design Sketching: How Many Rounds Before a Mold Is Safe?

Industrial Design Sketching: How Many Rounds Before a Mold Is Safe?

Comments
3 min read
Three color-matching rounds: how a product color survives to mass production

Three color-matching rounds: how a product color survives to mass production

Comments
7 min read
Same 3D file, new resin, cracked corners: digest shrinkage into the drawing

Same 3D file, new resin, cracked corners: digest shrinkage into the drawing

Comments
7 min read
Your prototype feels wrong: measure three ratios before you touch the shape

Your prototype feels wrong: measure three ratios before you touch the shape

Comments
7 min read
What a cordless vacuum teardown shows about CMF specifications

What a cordless vacuum teardown shows about CMF specifications

Comments
6 min read
MIM Parts Warp After Sintering: Tell Shrinkage From Support

MIM Parts Warp After Sintering: Tell Shrinkage From Support

Comments
6 min read
The Render Passed Unanimously; the Curvature Did Not Survive the Tooling

The Render Passed Unanimously; the Curvature Did Not Survive the Tooling

Comments
6 min read
The Three Elements of Product Form, In Order — the Third One Is Where the Mould Bill Starts

The Three Elements of Product Form, In Order — the Third One Is Where the Mould Bill Starts

Comments
5 min read
The Line Between ID and ME Is One Question: Can This Shape Be Made at a Sane Cost?

The Line Between ID and ME Is One Question: Can This Shape Be Made at a Sane Cost?

Comments
6 min read
Same Rounded Corner, RMB 5,000 vs RMB 50,000: It's Scope, Not Speed

Same Rounded Corner, RMB 5,000 vs RMB 50,000: It's Scope, Not Speed

Comments
6 min read
The Crease Is Physics. The 15999 Price Tag Is the Promise.

The Crease Is Physics. The 15999 Price Tag Is the Promise.

Comments
5 min read
Why Matte Plus Gloss Looks Cheap: It's the Seam Between Them

Why Matte Plus Gloss Looks Cheap: It's the Seam Between Them

Comments
5 min read
What Does Product Appearance Design Include? Seven Deliverables, Two Usually Missing

What Does Product Appearance Design Include? Seven Deliverables, Two Usually Missing

Comments
5 min read
Four Boundaries That Decide Whether a Beautiful Render Can Ship

Four Boundaries That Decide Whether a Beautiful Render Can Ship

Comments
6 min read
"Let Me Look At It Again": Why Design Proposals Fail In The First Three Pages

"Let Me Look At It Again": Why Design Proposals Fail In The First Three Pages

Comments
5 min read
Can the 3D Files From a Surface-Styling Studio Go Straight to Tooling?

Can the 3D Files From a Surface-Styling Studio Go Straight to Tooling?

Comments
6 min read
Beautiful Sketches That Never Get Approved: What to Actually Draw

Beautiful Sketches That Never Get Approved: What to Actually Draw

Comments
5 min read
40 Mood-Board Images, and the Client Picked a Blue Wall

40 Mood-Board Images, and the Client Picked a Blue Wall

Comments
7 min read
The Appearance Design Process Has Six Gates — Not One Pretty Render

The Appearance Design Process Has Six Gates — Not One Pretty Render

Comments
7 min read
Texture Depth 0.05 mm: How Much Draft Before It Stops Sticking?

Texture Depth 0.05 mm: How Much Draft Before It Stops Sticking?

Comments
6 min read
Rams' Ten Principles: Three Rules No Longer Survive 2026

Rams' Ten Principles: Three Rules No Longer Survive 2026

Comments
7 min read
The MIM Break-Even Point: One Division Sum Tells You the Order Volume

The MIM Break-Even Point: One Division Sum Tells You the Order Volume

Comments
5 min read
Samsung's First Smart Glasses at 41g: Where the Weight Has to Go

Samsung's First Smart Glasses at 41g: Where the Weight Has to Go

Comments
5 min read
Grip Ergonomics: From an 82mm Hand Width to the Right Diameter

Grip Ergonomics: From an 82mm Hand Width to the Right Diameter

Comments
5 min read
Amazon's Bee Recorder: Wearable Form Factor Hits the Microphone First

Amazon's Bee Recorder: Wearable Form Factor Hits the Microphone First

Comments
5 min read
Foamed Parts Shrink Worse Than Solid Ones: Which Mould Details to Change

Foamed Parts Shrink Worse Than Solid Ones: Which Mould Details to Change

Comments
6 min read
Rams' Ten Principles: Where Rule 5 and Rule 9 Collide

Rams' Ten Principles: Where Rule 5 and Rule 9 Collide

Comments
8 min read
Weld Lines Keep Landing on the Cosmetic Face? Check the Gate Position, Then the Wall Thickness

Weld Lines Keep Landing on the Cosmetic Face? Check the Gate Position, Then the Wall Thickness

Comments
7 min read
E-Coating or Spray Painting? Deep Cavities, Corners, and the Environmental Bill

E-Coating or Spray Painting? Deep Cavities, Corners, and the Environmental Bill

Comments
6 min read
Two Hours of Vibration Testing, Three M3 Screws Came Loose

Two Hours of Vibration Testing, Three M3 Screws Came Loose

Comments
7 min read
Curved Glass Forming: How to Choose Between Heat Bending, CNC and Precision Pressing

Curved Glass Forming: How to Choose Between Heat Bending, CNC and Precision Pressing

Comments
8 min read
A Phone Case Protects the Phone by Taking the Hit. Good Structure Makes the Product Take Its Own Hits.

A Phone Case Protects the Phone by Taking the Hit. Good Structure Makes the Product Take Its Own Hits.

Comments
5 min read
A Seam Off By 0.5 mm Ruins the Whole Leather Panel. It Was Decided Before Anyone Touched Leather.

A Seam Off By 0.5 mm Ruins the Whole Leather Panel. It Was Decided Before Anyone Touched Leather.

Comments
7 min read
A Swollen Battery Cracked the Back Cover. Here Is How Much Room a Battery Compartment Actually Needs.

A Swollen Battery Cracked the Back Cover. Here Is How Much Room a Battery Compartment Actually Needs.

Comments 1
7 min read
A Brake Pedal Bracket Snapped On Camera. Here Is What Injection-Molding Weight Reduction Actually Costs.

A Brake Pedal Bracket Snapped On Camera. Here Is What Injection-Molding Weight Reduction Actually Costs.

Comments
7 min read
Apple's MacBook Pro Is Getting an OLED Touchscreen. Here Is What Happens to the Hinge.

Apple's MacBook Pro Is Getting an OLED Touchscreen. Here Is What Happens to the Hinge.

Comments
4 min read
Carbon Fiber Enclosures Start at 1.5 mm: Ply Direction, Weave Alignment and the Real Cost Equation

Carbon Fiber Enclosures Start at 1.5 mm: Ply Direction, Weave Alignment and the Real Cost Equation

Comments
8 min read
Apple Watch Series 12 Teardown: Why the Battery Got Easier to Replace and the Display Still Didn't

Apple Watch Series 12 Teardown: Why the Battery Got Easier to Replace and the Display Still Didn't

Comments
5 min read
EMC Fixes Through Structural Design: Shield-Cavity Mating Surfaces, Conductive Foam Compression, and Grounding Spring Parameters

EMC Fixes Through Structural Design: Shield-Cavity Mating Surfaces, Conductive Foam Compression, and Grounding Spring Parameters

Comments
7 min read
Internal Cable Routing: How to Set the Fit Dimensions for Channels, Grommets and Cable Clips

Internal Cable Routing: How to Set the Fit Dimensions for Channels, Grommets and Cable Clips

1
Comments
4 min read
Choosing Mold Steel for 100,000 Parts: Hardness and Service Life of P20, 718H, NAK80 and S136

Choosing Mold Steel for 100,000 Parts: Hardness and Service Life of P20, 718H, NAK80 and S136

1
Comments
4 min read
Silicone Overmoulding: How to Tell If It Will Actually Bond

Silicone Overmoulding: How to Tell If It Will Actually Bond

1
Comments
6 min read
How to Choose a Product Design Company in Dongguan: 5 Checks and Price Ranges

How to Choose a Product Design Company in Dongguan: 5 Checks and Price Ranges

Comments
3 min read
What UL94 V-0 Actually Means: Choosing Between V-0, V-2 and HB Flame-Retardant Plastics

What UL94 V-0 Actually Means: Choosing Between V-0, V-2 and HB Flame-Retardant Plastics

Comments
4 min read
Your Enclosure Feels Tingly Like a Shock: The Ground Path That Broke at a Screw Hole

Your Enclosure Feels Tingly Like a Shock: The Ground Path That Broke at a Screw Hole

Comments
6 min read
loading...